Carburetors for Forklifts

Forklift Carburetor - A carburetor blends air and fuel together for an internal combustion engine. The device has an open pipe known as a "Pengina" or barrel, where the air passes into the inlet manifold of the engine. The pipe narrows in section and after that widens all over again. This system is called a "Venturi," it causes the airflow to increase speed in the narrowest part. Under the Venturi is a butterfly valve, which is also called the throttle valve. It operates so as to control the air flow through the carburetor throat and regulates the quantity of air/fuel mixture the system will deliver, which in turn regulates both engine power and speed. The throttle valve is a rotating disc that can be turned end-on to the airflow to be able to hardly restrict the flow or rotated so that it can absolutely block the flow of air.

This throttle is usually attached through a mechanical linkage of rods and joints and occasionally even by pneumatic link to the accelerator pedal on a car or equivalent control on different kinds of equipment. Small holes are situated at the narrowest part of the Venturi and at other locations where the pressure would be lessened when not running on full throttle. It is through these openings where fuel is released into the air stream. Exactly calibrated orifices, known as jets, in the fuel path are accountable for adjusting fuel flow.

Click to Download the pdf

Forklift Parts

Stacker Forklift Parts

Parts for Stacker Forklifts - A sort of compact forklift, the electric stacker is used to work in smaller areas, making lifting and loading much easier on the warehouse worker. Usually wide, but flat stuff such as pallets, slabs, and tubes are transferred with this particular piece of machine. There are metallic prongs jutting out horizontally from the body of...

More

---

Electric Stacker Parts

Part for Electric Stackers - Electric stackers, a type of compact lift truck specialized to be able to move in smaller areas, were used to make lifting and loading much easier on warehouse staff. Wide flat items such as tubes, slabs and pallets are transported with this particular piece of heavy machinery. There are metallic prongs jutting out horizontally from...

More

---

Meritor Part

Meritor Parts - Meritor is a leading global supplier that is proudly founded on a 100 year custom of quality and service. They concentrate on several integrated systems, modules and parts to original equipment manufacturers and the aftermarket for the transportation and industrial sectors. Meritor values the wishes of all their clients to guarantee their success while priding itself in...

More

---

Carriage Rollers

Carriage Roller - Particularly designed bearings known as carriage rollers are often found on lift masts since they allow them to perform better in tough environmental surroundings. The standard lift mast is usually subject to frequent shocks, oscillations, vibrations and high dynamic and static loads. This equipment is often exposed to environmental influences such as heat, dust, cold, contamination, aggressive...

More

---

Parts for Hydraulic Boom Lift

Parts for Hydraulic Boom Lifts - Telehandlers or Shooting Forklift Booms Shooting forklift booms are also referred to as telehandlers or telescopic booms. They are extremely useful on rough terrain forklifts and lift to heights of 20-40 feet. These booms are normally utilized outside on construction job locations or within the agricultural industry. Booms Should Not Be Used On Pipes...

More

---

Parts for Propane Forklifts

Propane Forklift Parts - Propane forklifts use an engine that runs on propane gas. This propane stores in a pressurized tank and can be easily refilled. Once the propane gas is pushed into the engine, it is converted into vapour while it de-pressurizes. Using a throttle, the flow of vapour can be controlled. Inside the motor, the vapour combines along...

More

---

Attachment for Scissor Lifts

Scissor Lift Attachment - The scissor lift, often acknowledged as a table lift, is an industrial lift that has been modified for use in wholesale and retail settings. Mechanized lifts have been used for decades within the manufacturing and production industries to efficiently raise and lower people, supplies and equipment. The scissor lift is a platform with wheels that functions...

More

---

Attachment for Telehandlers

Attachment for Telehandlers - Telehandlers or also called Telescopic handlers are very popular piece of heavy construction equipment usually used in agriculture and construction industries. These equipments have farthest reaching ability and are able to reach places where a conventional lift truck cannot get to. Telehandlers enable the individual operating it to easily do whatever thing a crane could accomplish...

More

---