SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Parts for Forklift
Used Forklift Parts - Eventually, lift truck parts will wear and should be replaced. Acquiring new parts could become a costly undertaking so one more idea is to acquire used lift truck components. This could save a lot of cash eventually. It is a good idea to acquire used forklift parts that have been remanufactured. These components would ensure that you are getting parts which will work for a long time and be productive.
Worn or broken parts that are reproduced are a less expensive solution as opposed to rebuilding. With rebuilding components, just the components which are worn out or broken get changed, which means that other wearable parts could break down soon after purchase.
Remanufacturing however provides the best assurance for used parts. Remanufactured parts are taken apart and cleaned and then all wearable pieces are changed. All wearable components are replaced regardless of age or wear which is another rationale why reproduced components generally work so much better. Whatever component within the part is new and this provides far longer life to the second-hand part. Depending on the forklift components that are being redone, the cleaning process and the entire remanufacturing process would differ.
The engines are cleaned after a complete disassembly. Different engine components like rings, pistons, spark plugs, valve springs, filters, and valves can be replaced during the process of remanufacturing. The engines are hot tested after reassembly to guarantee that there are no noise, no oil pressure problems, no leaks or any vacuum.
Transmissions are disassembled, oven cleaned and pressure washed. A thorough inspection is done in order to check for any cracks. Seals, bearings and bushings are all replaced. Normally, the replacement parts used on transmission components meet OEM specifications.
A few forklift components like the water pump, torque converters, the alternator, steer axles and the starter can be quite serviceable after worn parts are replaced. The electronic control in the electric lift truck is maintained by the control card. This card could even be reproduced with replacing all aged and worn out components. Not like different lift truck parts the control card can only have the worn and aged components replaced.
Parts that are remanufactured have to be meticulously checked upon reassembly to ensure they are in good condition prior to being sold. When obtaining these components, it is a good idea to be sure that they have undergone all of the proper testing and inspections. On certain bigger components like for instance engines, transmissions and steer axles, OEM specification replacement parts should be utilized.
The lift truck dealer could ensure that the parts they have reproduced meet the OEM specifications. This will likewise guarantee the components meet industry standards. A lot of details go into remanufacturing second-hand components. This attention to detail provides more serviceability out of remanufactured parts opposed to the parts that were just rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
LOCAL: 909-327-3114
928 N San Fernando Blvd J-152
Burbank, California
forkliftpartsburbank.com
Email Us
About Us