Swing Carriages

Swing Carriages - The load capacity of a lift truck jib has a maximum of around 1935 lbs to as much as 6000 pounds on either the extended or retracted positions range. You might have to consult with a material handling specialist about the specific restrictions of your forklift application. The load capacity ratings are really intended for the jib itself and not the forklift or the utmost load which could be transferred securely making use of a certain forklift. It is essential to bear in mind that at any time when any attachments like for instance a lift truck jib are fitted to the forklift, the new center of gravity created by the accessory would decrease the general lift capability of the forklift. There are directions available which provide information on how to properly determine these load limits.

Before making use of a forklift jib, make certain that it is well secured to the lift truck with the use of hooks and shackles. Continuously double check to be able to verify that the screw pins are tight. It is vital to even double check that the freight calculations have been done properly. Remember to consider the truth that rated capacities at times decrease whenever the boom is in an elevated position, every time the boom is fully extended with telehandlers or when the mast is slanted frontward.

Important tips when using an adjustable jib is to never pull a load with the use of this particular sort of attachment. These types of attachments are only meant for vertical lifting. Additionally, avoid letting the load swing. Utilize extreme caution each and every time a load is carried so as to prevent tipping over the truck.

Click to Download the pdf

Forklift Parts

Stacker Forklift Parts

Parts for Stacker Forklifts - A sort of compact forklift, the electric stacker is used to work in smaller areas, making lifting and loading much easier on the warehouse worker. Usually wide, but flat stuff such as pallets, slabs, and tubes are transferred with this particular piece of machine. There are metallic prongs jutting out horizontally from the body of...

More

---

Electric Stacker Parts

Part for Electric Stackers - Electric stackers, a type of compact lift truck specialized to be able to move in smaller areas, were used to make lifting and loading much easier on warehouse staff. Wide flat items such as tubes, slabs and pallets are transported with this particular piece of heavy machinery. There are metallic prongs jutting out horizontally from...

More

---

Meritor Part

Meritor Parts - Meritor is a leading global supplier that is proudly founded on a 100 year custom of quality and service. They concentrate on several integrated systems, modules and parts to original equipment manufacturers and the aftermarket for the transportation and industrial sectors. Meritor values the wishes of all their clients to guarantee their success while priding itself in...

More

---

Carriage Rollers

Carriage Roller - Particularly designed bearings known as carriage rollers are often found on lift masts since they allow them to perform better in tough environmental surroundings. The standard lift mast is usually subject to frequent shocks, oscillations, vibrations and high dynamic and static loads. This equipment is often exposed to environmental influences such as heat, dust, cold, contamination, aggressive...

More

---

Parts for Hydraulic Boom Lift

Parts for Hydraulic Boom Lifts - Telehandlers or Shooting Forklift Booms Shooting forklift booms are also referred to as telehandlers or telescopic booms. They are extremely useful on rough terrain forklifts and lift to heights of 20-40 feet. These booms are normally utilized outside on construction job locations or within the agricultural industry. Booms Should Not Be Used On Pipes...

More

---

Parts for Propane Forklifts

Propane Forklift Parts - Propane forklifts use an engine that runs on propane gas. This propane stores in a pressurized tank and can be easily refilled. Once the propane gas is pushed into the engine, it is converted into vapour while it de-pressurizes. Using a throttle, the flow of vapour can be controlled. Inside the motor, the vapour combines along...

More

---

Attachment for Scissor Lifts

Scissor Lift Attachment - The scissor lift, often acknowledged as a table lift, is an industrial lift that has been modified for use in wholesale and retail settings. Mechanized lifts have been used for decades within the manufacturing and production industries to efficiently raise and lower people, supplies and equipment. The scissor lift is a platform with wheels that functions...

More

---

Attachment for Telehandlers

Attachment for Telehandlers - Telehandlers or also called Telescopic handlers are very popular piece of heavy construction equipment usually used in agriculture and construction industries. These equipments have farthest reaching ability and are able to reach places where a conventional lift truck cannot get to. Telehandlers enable the individual operating it to easily do whatever thing a crane could accomplish...

More

---